ECG ESP 20101 Manual De Instrucciones página 64

1) Before first time use.
GB
1. Put the lever with filter WITHOUT COFFEE in the machine under the symbol „INSERT" so that the tabs on
the metal cup fit in the steam head. Secure everything by turning the lever counterclockwise in the „LOCK"
position.
2. Place a cup on the grid under the metal cup. Make sure that the knob control is in neutral position
the button in the „coffee" position .
3. Plug the appliance in the power outlet and turn it on using the ON/OFF switch. The red operation indicator
lights up.
4. Turn the knob control in the position
pouring out, turn the knob immediately back to neutral position .
5. Wait until the white preheat indicator lights up. Then switch the knob again into position
water to flow from the nozzle until the white preheat indicator goes off (approx. 1 minute). Then return the
knob in the neutral position .
Note: Use the same procedure for preheating the coffee.
Cleaning the nozzle.
Press the ON/OFF switch, the operation indicator lights up (red).
1.
2. Place a suitable deep container with water under the nozzle to capture the steam. The nozzle should be
sufficiently immersed in the container. Carefully, the steam is hot.
3. Leave the button in the position
the water starts streaming from the steam head, turn the knob to neutral position .
4. Press the steam button in position
the knob control in the position
indicator goes off (approx. 1 minute). Then return the knob in the neutral position .
The coffee machine is now ready to use.
2) NORMAL USE PROCEDURE.
Make sure there is enough water in the water tank before each use. Do not exceed the "MAX" line.
Preheat
To prepare a good cup of hot Espresso coffee, we recommend preheating the machine, including the metal
cup, filter and cup, so that the taste of the coffee is not affected by the cold parts.
1. Place the lever with filter into the machine under the "INSERT" mark so that the tabs on the metal cup fit
into the brewing head. Secure everything by turning the lever counterclockwise in the „LOCK" position.
64
, which will pump water into the system. When the water starts
(coffee) and switch the knob control in the position
(steam) and wait, until the white preheat indicator lights up. Turn
(steam). Allow water to flow from the nozzle until the white preheat
and
. Allow hot
(coffee). When