Oster FPSTJE318C Manual De Instrucciones página 24

OP E R AT I N G I NS TRU CTION S
ASSEMBLING THE JUICE EXTRACTOR
Follow the assembling instructions listed below before using your Oster
Juice Extractor:
1. Before you start assembling your juice extractor, make sure it is unplugged and it
is placed on a dry and level surface.
2. Place filter basket on top of the motor base (Figure 1).
3. Place the stainless steel filter on top of the filter basket pushing down and turning
it until it fits into the grooves of the motor shaft (Figure 2).
4. Place juicer cover/lid on top of the filter basket (Figure 3).
Fig. 1
5. Raise the stainless steel locking arm and place it on the grooves on the sides of
the lid. Your juice extractor is equipped with a safety feature that will ensure the
unit will not operate unless the lid is properly locked. (Figure 4).
6. Place the pulp container into position by tilting it slightly (Figure 5). Push pulp
container forward until it snaps into place.
IMPORTANT: Make sure Pulp Container edge is underneath basket.
7. Place the 1.25 liter jar under the spout located on the right hand side of the juicer
by tilting it slightly. Other jars or glasses can be used as well (Figure 6).
Fig. 4
Fig. 2
Fig. 5
En g lish -5
®
Fig. 3
Fig. 6