Hanging The Fan - Faro OVNI Manual De Uso

INSTRUCCIONES DE SEGURIDAD / INSTRUCTION DE SÉCURITÉ SAFETY INSTRUCTIONS / INSTRUÇÕES DE SEGURANÇA
SICHERHEITSHINWEISE / VEILIGHEIDSINSTURCTIES INSTRUZIONI DI SICUREZZA
Security screw
INSTALLING THE FAN

HANGING THE FAN

1. Be sure your mounting bracket is secure. The entire weight of the fan will now be hanging from it.
2. Lift fan /downrod/ball assembly/ into hanger bracket opening. NOTE: the tab opposite hanger bracket
opening should fit into slot on ball (fig. 3)
3. Make wire connections, (refer to section titled "electrical connections". Fan can be operated by a fan wall
control OR by the supplied remote control.
4. Slide canopy up and fasten to hanger bracket with screws provided AFTER all electrical connections
are complete.
Hanger bracket
Groun wire
downrod
Collar cover
Wiring wires
Cotter pin
Wiring harness
Ball slot
3 Hook-up-wires
Hang ball
Canopy
Reverse switch
Mounting collar
Downrod pin
Tap
Ball
Faro
- 28 -