Bartscher 190990 Instrucciones De Uso página 9

Dispensador isotérmico
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 19
Topping up with beverages
Topping up the container is very easy. Press the buttons on the top part of the
pump, open the cover of the pump by lifting it upwards. Remove the pump pipe from
the dispenser.
Top up the container with a desired beverage. You can see the topping up level by
looking at the topping up level indicator located at the front of the jug.
Replace the pump pipe in the jug and close the pump cover until the buttons click.
Place the dispenser on the base.
If required, connect several bases to
make a row of dispensers.
Dispensing the beverages
To dispense the beverage from the dispenser, pull the
pump lever upwards until blocked, and then press
downwards (see right) to initiate the pump mechanism.
Keep pressing until you obtain a desired amount of the
beverage.
To close the dispenser, lift the lever slightly up,
release from blocking and place the lever on the cover
with the pump.
Place the silicon label with a relevant name of the
beverage on the extended part of the lever on the
cover with the pump.
- 7 -
loading