Safety Instructions; Electrical Connection - Zanussi ZOB10401WK Manual De Instrucciones

Before carrying out any maintenance, disconnect the appliance
•
from the power supply.
Ensure that the appliance is switched off before replacing the
•
lamp to avoid the possibility of electric shock.
Do not use the appliance before installing it in the built-in
•
structure.
Do not use a steam cleaner to clean the appliance.
•
Do not use harsh abrasive cleaners or sharp metal scrapers to
•
clean the glass door since they can scratch the surface, which
may result in shattering of the glass.
If the mains power supply cable is damaged, it must be
•
replaced by the manufacturer, its Authorised Service Centre or
similarly qualified persons to avoid an electrical hazard.

SAFETY INSTRUCTIONS

INSTALLATION
WARNING! Only a qualified person
must install this appliance.
• Remove all the packaging.
• Do not install or use a damaged appliance.
• Follow the installation instructions supplied with
the appliance.
• Always take care when moving the appliance as
it is heavy. Always use safety gloves and
enclosed footwear.
• Do not pull the appliance by the handle.
• Keep the minimum distance from other
appliances and units.
• Install the appliance in a safe and suitable place
that meets installation requirements.
Cabinet minimum
height (Cabinet under
the worktop minimum
height)
Cabinet width
Cabinet depth
Height of the front of
the appliance
Height of the back of
the appliance
Width of the front of
the appliance
590 (600) mm
560 mm
550 (550) mm
598 mm
579 mm
594 mm
Width of the back of
the appliance
Depth of the appliance
Built in depth of the
appliance
Depth with open door
Ventilation opening
minimum size. Opening
placed on the bottom
rear side
Mains supply cable
length. Cable is placed
in the right corner of
the back side
Mounting screws

ELECTRICAL CONNECTION

WARNING! Risk of fire and electric
shock.
• All electrical connections should be made by a
qualified electrician.
• The appliance must be earthed.
• Make sure that the parameters on the rating
plate are compatible with the electrical ratings
of the mains power supply.
• Always use a correctly installed shockproof
socket.
558 mm
561 mm
540 mm
1007 mm
560x20 mm
1100 mm
4x25 mm
3