Recogni�On Of Led Indica�On; Checking The Gate Movements - Accessmatic Dogo 1224 Manual De Usuario

d
ogo
1224
Opening your life
1). The transmi�er Learning
Press "RF Learn" bu�on for 2 seconds, and the LED3 is on; then press the transmi�er (A) bu�on; the LED3 will blink twice
and then be off. The system learning is complete.
4.1.2 Recogni�on of LED

4.1.3 Checking the Gate Movements

1). Release the gearmotor with the release key and move the gate to the middle so that it is free to move in both opening
and closing direc�ons; then lock the gearmotor.
2). Perform the gate opening and closing several �mes and make sure the gates reaches the limit switch at least 2~3 cen�-
meters before the mechanical stop.
www.accessmatic.com
15