Ph-2 Photocells; Pr-1 Radio Transmi�Er; Pf-1 Flashing Light; Pks-1 Key Selector - Accessmatic Dogo 1224 Manual De Usuario

d
ogo
1224
Opening your life

2.3.3 PH-2 Photocells

The pair of PH-2 photocells has to be installed on the wall and connected to
the control panel. The func�on of the photocells is to detect the obstacles
found on the op�cal axis between the transmi�er (TX) and the receiver (RX).
2.3.4 PR-1 Radio Transmi�er
PR-1 radio transmi�er is used for the remote control of the gate movement.
To use the transmi�er, press and hold the bu�on for 1 second. There are two
bu�ons on the transmi�er and (A) bu�on is "open-stop-close mode" and (B)
bu�on is "pedestrian mode".

2.3.5 PF-1 Flashing Light

PF-1 flashing light is controlled by Dogo 1224 control unit and blinks when the
gate is moving or blinks 3 seconds before the gate moves. The flashing light
stops blinking when the gates.

2.3.6 PKS-1 Key selector

The PKS-1 key selector is used for opening the gate outdoors without the
radio transmi�er. PKS-1 key selector is supplied with two keys.
2.3.7 PPB-1 Push Bu�on
The PPB-1 push bu�on is used for opening the gate indoors without the radio
transmi�er.
www.accessmatic.com
4