Idiomas disponibles
Idiomas disponibles
Storing phone numbers in the one-touch
memories:
Lift the handset
Press the PROG key
Press one of the 4 one-touch memory
keys
: Enter the phone number to be stored
Press the PROG key
Listen the confirmation tone - long
beep
Hung up
Using the one-touch memories to make
a call:
Lift the handset
Press the desired one-touch memory
key
Erasing the one-touch memories:
Lift the handset
Press the PROG key
Press the one-touch memory key that
you wish to erase
Press the PROG key
Listen the confirmation tone - long
beep
Hung up
Storing phone numbers in the two-touch
memories:
Lift the handset
Press the PROG key
Press the MEM key
Press one of the two-touch memory
keys
: Enter the phone number to be stored
Press the PROG key
Listen the confirmation tone - long
beep
Hung up
Using the two-touch memories to make
a call:
Lift the handset
Press the MEM key
Press the desired two-touch memory
key
Erasing the two-touch memories:
Lift the handset
Press the PROG key
Press the MEM key
Press the two-touch memory key that
you wish to erase
Press the PROG key
Listen the confirmation tone - long
beep
Hung up
Note:
• A phone number won't be stored in the
memories if it is longer than 32 digits.
• The keys
and
are stored in the
memories, independently of the used
dialing mode, but they only have effect
on the TONE mode.
• It is possible to store an external
telephone number in one of the one-
touch or two-touch memories, when the
telephone is connected on a PBX
system. Just insert, before the number
that will be stored, the access code for
external line, followed by a pause (press
the PAUSE key
). If this code is not
programmed, insert a pause (press the
PAUSE key
) after the access code to
the external line
5
