Idiomas disponibles
Idiomas disponibles
Detail A
Detail B
Recommendations for Installation
Please, observe the following guidelines:
• For your own safety and protection, do
not uses the telephone in places with
overheat
or
extreme
humidity.
telephone
operates
at
temperatures
between +5ºC and +55ºC and it is not
water-proof.
• Varnished or lacquered furniture may be
marked by some parts of the telephone
such as the rubber feet.
• Place the telephone at least one meter
away from devices such as cordless
telephones or TV sets. These devices
may cause interference in the telephone.
• To clean the telephone, just use a damp
or antistatic cloth. Never use a dry cloth
(danger of electrostatic discharge) or any
abrasive cleaning products.
• When the telephone reaches its end of
service life, dispose of it in a way that
does not cause any harm to the
environment, in accordance with the local
legal requirements.
General
considerations
programming
The programming functions are confirmed
on pressing the PROG key
the operation. If you wish to cancel (i.e., in
case of error), hung up instead of pressing
the
PROG
key
.
programming will be kept.
Confirmation tone (beep)
A confirmation tone (beep) is given out by
the telephone in order to register when a
key is pressed. On completion of a
successful programming operation, a long
confirmation tone is given out. If the
operation is incorrect, the equipment will
give out three short tones (error tones).
Deactivating the tones:
Press the PROG key
: Enter the code 1110
The
Press the PROG key
Reactivating the tones:
Press the PROG key
: Enter the code 1111
Press the PROG key
Setting the dialing mode (tone/pulse)
Your telephone must be programmed for
TONE dialing or PULSE dialing, according
to the telephone line it is connected to. The
default factory setting is the TONE dialing
2
about
the
at the end of
The
original
