Kenwood COOKING CHEF KM080 Serie Instrucciones página 9

K-beater
whisk
dough hook
high temperature flexible beater
stirring tool
to fit a tool 2 Place the tool in the socket, locating the shaft pin in the groove and then
to remove a tool
the mixer
the mixing tools and some of their uses
For making cakes, biscuits, pastry, icing, fillings, éclairs and mashed
G
potato.
For eggs, cream, batters, fatless sponges, meringues, cheesecakes,
G
mousses, soufflés. Don't use the whisk for heavy mixtures (e.g. creaming
fat and sugar) - you could damage it.
For yeast mixtures only.
G
Suitable for many cooking operations in particular cooking custards,
G
scrambled eggs and sauces. Ideal for scraping mixes both hot and cold
from the sides of the bowl during mixing. Also suitable to sauté vegetables.
Suitable to use during cooking to maintain the consistency of food
G
e.g. chicken, fish, vegetables and fruit.
to use your mixer
Before using the mixer ensure the temperature and speed controls are
switched to the off 'O' positions.
1 Turn the head-lift lever clockwise
turn to lock into position .
stirring tool - to fit the stirring tool, insert the shaft into the socket, then
line up the slot on the extension so that it is located beneath the metal pin on
the underside of the mixer head. Hold the paddle and turn so that the shaft
pin is below the groove then push up and turn to lock into position
3 Fit the bowl onto the base - press down and turn clockwise
4 To lower the mixer head, raise it slightly, then turn the head lift lever clockwise.
Lower into the locked position.
Reverse step 2 above. (Always use oven gloves to remove tools after
G
cooking).
5 Connect the mixer to the power supply. The speed and temperature
indicator lights will illuminate briefly. The display will show
clear leaving the power on indicator illuminated
6 Turn the speed control to the desired setting
(see page 10 for recommendations), the mixer will start and the speed
control indicator light will flash. The timer will count up in 1 second intervals.
The speed can be changed at any time whilst the mixer is operating.
7 Stop the mixer by returning the speed control to the off 'O' position.
Important - If at any time, the mixer head is raised during an operation,
the mixer will automatically stop and beep and it will not re-start when the
mixer head is lowered. To re-start the mixer turn the speed control to the
off 'O' position and then re-select a speed.
pulse button
The pulse button can only be used when the speed control is in the off 'O'
position.
To select pulse, press the pulse button
speed for as long as the button is held in this position. If the bowl contents
are above 60°C, the speed will increase gradually. This will be accompanied
by a beeping sound and the speed and temperature indicator lights will flash
quickly.
fold button
Press and release the fold button
operate on minimum speed for 2 revolutions and then stop. The button
can be pressed for a longer operation or pressed repeatedly as needed to
combine ingredients.
Note: If the fold button is pressed whilst the motor is running it will perform
the standard fold function and then return to the selected speed.
9
and raise the mixer head until it locks.
.
and then
.
and the mixer will run at maximum
P
and the mixer will automatically
.