User Management Parameters; Method For Operating Keypad - toscano TDS600 Serie Manual De Usuario

05. Alarm state display
When under running and standby situation:
It means enter failure alarm display status
upondetecting failure signal and display failure
code sparklingly (Fig5-6)Inverter keeping running
state But this alarm display can not be reset
button eliminated: After only fi nd the cause of the
alarm: in order to eliminate this factor Normal.
5.2.5. User Management Parameters
In order to facilitate the user parameter management: TDS600 component
model parameter menu for display management. The parameters do not need
to be displayed can be shielded.
01. Method parameter setting mode display.
By setting F00.00 = 0,1,2,3 respectively parameter mode is set: Basic menu
mode: menu mode Intermediate: Advanced menu mode and user menu mode.
Basic menu F00,F01,F02,F03,F26
F00,F01,F02,F03,F04,F05,F06,F07,F08,F09,F10,F11,
Middle menu
F12,F13,F14,F15,F16,F18,F19,F26
F00,F01,F02,F03,F04,F05,F06,F07,F08,F09,F10,F11, F12,F13,F14,F15,F16,F
Advance menu
17,F18,F19,F20,F21,F22,F23, F24,F25,F26,F27
User custom F00.00 and F25 parameters group
5.2.6. Method for operating keypad
Can carry on various operation to the inverter through keypad, for example:
01. Status parameter display switching:
After pressing key
displaying one supervision parameter code for 1 second will display this displaying one supervision parameter code for 1 second will display this
parameter value automatically. Press key
interface.
162
, display C group status supervision parameter; after
Fig.5-6
will go back to supervision