Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Normal
109~165
Step4 Apply Control Solution.
Hold the meter up to meet the absorbent
hole of the test strip and the drop will
be automatically absorbed. Once the
confirmation window is completely filled,
the meter will start counting down.
To avoid contaminating the control solution
with the contents of the test strip, you will
have to place a drop of control solution on
a clean surface. Do not directly apply con-
trol solution to a test strip.
Step5 Result Appears in 7 Seconds.
After counting to 0, the control solution
test result will appear. Compare this result
with the range printed on the test strip vial.
The result should fall within this range.
Out-of-range results
If test results fall outside the printed range,
check the "Operating Problem" section in
the troubleshooting guide and repeat the
test. If your results continue to be out-of-
range, the system may not be working
properly. Do NOT test your blood. Please
contact Customer Care Line at 1-888-
307-8188, 1-866-469-2632 for help.
27
Capítulos
Tabla de contenido
