Tabla de contenido
CM-4046HD Installation Instructions:
The CM-4046HD can be installed either on the wall or
placed on a table top.
Wall Mount Installation
1. Identify the direction of the desired TV station's
transmitter by using www.antennaweb.org.
2. Mount the two wood screws on the wall where the
antenna will be mounted. The screws need to be level
and 80 mm (3.149") apart. See Fig. 6
3. Snap the supplied plastic mounting bracket into the
two holes on the back of the antenna and push the
bracket up to lock it in place. See Fig. 6
4. Align the two holes on the mounting bracket with the
screws installed on the wall, push the bracket onto the
screws, then push down to lock it in place. See Fig. 7
Table Top Installation
1. Identify the direction of the desired TV station's
transmitter by using www.antennaweb.org.
2. The antenna can be installed either vertically or
horizontally. For table top installations, the supplied
plastic stand is installed onto the back of the antenna.
The end of the stand has two ridges, which are used to
select the mounting orientation.
3. For vertical installations, insert the plastic stand into
the hole on the back of the antenna in the position
marked "Vertical". See Fig. 8
4. For horizontal installations, insert the plastic stand into
the hole on the back of the antenna in the position
marked "Horizontal". See Fig. 8
5. Place the antenna in the desired orientation on the
table top near the TV set.
14
Tabla de contenido
