We value your experience using Sunny Health and Fitness products. For assistance with parts or
8669).
#81L/R 9/16*20*H8*S22 2PCS
#22 M5*12*Φ8.5 2PCS
#23 d5*Φ13*1 2PCS
#78 S14-15-17 1PC
#79 S13-15 1PC
#80 S8-14 22 1PC
10
STEP 3:
IMPORTANT! Read instructions carefully,
failure to do so may cause permanent
damage to your bike.
Remove the 2 Nylon Nuts (No. 81L/R)
located on the Pedals (No. 82L/R).
Screw the Left Pedal (No. 82L) COUNTER-
CLOCKWISE into the Left Crank Arm (No.
36L). Once properly screwed into place, use
the Wrench (No. 79) to hold the bolt of the
pedal and screw the Left Nylon Nut (No.
81L) CLOCKWISE to the thread end of the
Left Pedal (No. 82L) securely with Spanner
(No. 80).
Screw
the
Right
CLOCKWISE into the Right Crank Arm
(No. 36R). Once properly screwed into the
place, use the Wrench (No. 79) to hold the
bolt of the pedal and screw the Right Nylon
Nut (No. 81R) COUNTER-CLOCKWISE to
the thread end of the Right Pedal (No. 82R)
securely with Spanner (No. 80).
Remove the preassembled 2 Screws (No.
22) and 2 Washers (No. 23) from the Main
Frame (No. 1). Connect the Water Bottle
Holder (No. 21) to the Main Frame (No. 1)
using 2 Screws (No. 22) and 2 Washers
(No. 23). Tighten and secure with Spanner
(No. 78)
Pedal
(No.
82R)