Replacing The Light Bulb; Preparing For Vacation; Preparing To Move - GE GTR10HAX Manual Del Propietario E Instalación

Screw
Hole
Bulb
Cover
10' Refrigerator Light Location
Screw
Hole
Bulb
Cover
12' Refrigerator Light Location

Replacing the Light Bulb

Moving the control to COLD does not remove
power to the light circuit.
The bulb is located behind the shield
in the back wall.
Unplug the refrigerator.
Remove the shelves (if necessary).
Remove the screw.
Gently remove the light shield by
inserting a flat head screwdriver
into the slot at the top of the shield
and pop it off.

Preparing for Vacation

For long vacations or absences, remove food
and unplug the refrigerator. Clean the interior
with a baking soda solution of one
tablespoon (15 ml) of baking soda to one
quart (1 liter) of water. Leave the doors open.

Preparing to Move

Secure all loose items such as shelves and
drawers by taping them securely in place
to prevent damage.
Replace the bulb with an appliance
bulb of the same or lower wattage.
Insert the tab at the bottom of the light
shield into the light bulb housing and
snap into place.
Replace the screw.
Replace the shelves if removed.
Plug in the refrigerator.
Be sure the refrigerator stays in an upright
position during moving.
ge.com
7