Remote Hand Control (Ref. 283551); Figure 17. Remote Hand Control - Johnson & Johnson DePuy Synthes FMS VUE II Manual Del Usuario

To remove the blade, use your thumb to rotate the blade locking ring to the left, then pull .

6.7.6 Remote Hand Control (Ref. 283551)

Connect the device to the port on the front of the pump marked with the Remote Hand
Control icon . Figure 17 shows the Remote Hand Control .
RUN/STOP button
Press to activate the system in RUN mode.
Press again to deactivate the system in STOP mode .
PRESSURE buttons
Press the minus (-) symbol to decrease the pre-set
pressure .
Press the plus (+) symbol to increase the pre-set
pressure .
BLOODSTOP™ button
Press to start a cycle of increasing pressure and
flow that clears blood and debris from the field of
view .
FLOW+ button
Press to increase the amount of flow . In the default
mode, press and hold this button to increase flow .
SHAVER SUCTION buttons
Press to increase (+) or decrease (-) the level of
suction through the shaver .
SHAVER SPEED buttons
Press the (+) symbol to increase the shaver speed .
Press the (-) symbol to decrease the shaver speed .

Figure 17. Remote Hand Control

47