Datalogger Function - Steinberg Systems SBS-SM-130C Manual De Instrucciones

Repeat the operation for marker B, making sure that A is no
longer highlighted in yellow.
The start time and initial value, the end time and end value,
number of measurements and the average value will be
displayed in the lower left corner of the window.

2.4. DATALOGGER FUNCTION

2.4.1. SETTINGS
This function is used to set the data sampling rate (1-36000
seconds), the date format („YY-MM-DD" (year-month-day),
„MM-DD-YY" (month-day-year), „DD – MM-YY „(day-
month-year)) and the recording mode. It also shows the
date and time of measurement.
EN
2.4.2. Downloading data from the meter to the computer.
2.4.3. CLEANING THE MEMORY
To clean the memory, connect the meter to the computer. If
necessary, download and save the data, then click „CLEAR"
to delete the data in memory.
3. USING THE DEVICE
3.1. Press the software icon (II.) on the computer desktop.
3.2. Connect the meter to the computer with a USB cable
and turn on the meter with the ON/OFF button.
3.3 After the software has opened, click on „Time
settings" to adjust the date and time.
3.4 To start the measurement and real-time monitoring,
set the record name, sampling frequency, alarm
upper and lower limit.
3.5 To disconnect the device from the computer
software, click on „Disconnect meter from computer",
disconnect the USB cable and turn off the meter.
6 6
Rev. 14.03.2019