Triton JOF 001 Instrucciones De Uso página 10

Excessive vibration
Heavy sparking occurs inside
motor housing
Micro adjuster "clicks"
Shutter on power switch not
releasing
Can't plunge to collet lock
position
WARRANTY
To register your guarantee visit our web site at
www.tritontools.com* and enter your details.
Your details will be included on our mailing list (unless
indicated otherwise) for information on future releases.
Details provided will not be made available to any third party.
GB
PURCHASE RECORD
Date of Purchase:
Model: JOF001
Serial Number: __________________
Retain your receipt as proof of purchase
Troubleshooting / Warranty
10
• Bent cutter shank
• Brushes not moving freely
• A rmature short circuited or open
circuited
• Commutator dirty
• Plunge lock engaged
• R eached end of adjustment
range.
• R outer is plunged to full depth - in
collet lock position
• Power switch "On"
___ / ___ / ____
• Replace cutter
• D isconnect power, remove brushes, clean
or replace
• Go to www.tritontools.com for your nearest
Triton Approved Service Agent
• Go to www.tritontools.com for your nearest
Triton Approved Service Agent
• Release plunge lock lever
• Reset the router
• Reduce plunge depth
• Switch power 'Off'
Triton Precision Power Tools guarantees to the
purchaser of this product that if any part proves to
be defective due to faulty materials or workmanship
within 12 MONTHS from the date of original
purchase, Triton will repair, or at its discretion
replace, the faulty part free of charge.
This guarantee does not apply to commercial use
nor does it extend to normal wear and tear or
damage as a result of accident, abuse or misuse.
* Register online within 30 days.
Terms & conditions apply.
This does not affect your statutory rights