Mounting And Operation; After-Sales Service And Application Service - Bosch ARM 33 Manual Original

OBJ_BUCH-1996-005.book Page 15 Thursday, January 14, 2016 1:02 PM

Mounting and Operation

Action
Delivery Scope
Wheel Assembly
Handle Assembly
Snap together the Grassbox
Grassbox fitting/removing
Adjusting the Cutting Height
Troubleshooting
TOP
Problem
Motor refuses to start
Machine functions
intermittently
Machine leaves ragged finish
and/or
Motor labours
Blade not rotating while garden
product switched on
Excessive vibrations/noise
After-sales Service and Application
Service
www.bosch-garden.com
In all correspondence and spare parts orders, please always
include the 10-digit article number given on the type plate of
the garden product.
Bosch Power Tools
Action
Starting
Figure Page
Stopping
1 201
Working Advice
2 202
Blade Maintenance
3 203
Selecting Accessories
4 204
5 204
Possible Cause
Power turned off
Mains socket faulty
Extension cable damaged
Fuse faulty/blown
Grass too long
Motor protector has activated
Extension cable damaged
Internal wiring of machine damaged
Motor protector has activated
Height of cut too low
Cutting blade blunt
Possible clogging
Blade fitted upside down
Cutting blade obstructed
Blade nut/bolt loose
Blade nut/bolt loose
Cutting blade damaged
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: [email protected]
English | 15
Figure
6
6
7
8
9
Corrective Action
Turn power on
Use another socket
Inspect cable, replace if damaged
Replace fuse
Increase height of cut and tilt garden product
to reduce starting load
Allow motor to cool and increase height of cut
Inspect cable, replace if damaged
Contact Service Agent
Allow motor to cool and increase height of cut
Increase height of cut
Replace the blade
Check underneath the garden product and
clear out as necessary (always wear protective
gloves)
Refit blade correctly
Switch off garden product
Clear obstruction (always wear protective
gloves)
Tighten blade nut/bolt (17 Nm)
Tighten blade nut/bolt (17 Nm)
Replace the blade
F 016 L81 374 | (14.1.16)
Page
205
205
206
206
207