Operating Instructions - LG LRG3091ST Manual Del Propietário

18
HOW TO USE

Operating Instructions

How to Adjust the Temperature
Settings
You may find that your new oven cooks differently than
the one it replaced. Use your new oven for a few weeks to
become more familiar with it before changing the temperature
settings. After familiarizing yourself with the new oven, if
you still think that it is too hot or too cold, you can adjust the
thermostat yourself.
CAUTION
DO NOT use thermometers, such as those found in
grocery stores, to check the temperature setting of your
oven. These thermometers may vary 20–40 degrees.
(For model: LRG3081 / LRG3091 / LRG3021)
1
Press and hold the Bake button for 3 seconds.
2
Using the + button, enter the amount you wish to
increase the temperature.
3
Press the START button to accept the increased
temperature.
To decrease(-) temperature adjustment
(For model: LRG3081 / LRG3091 / LRG3021)
1
Press and hold the Bake button for 3 seconds.
2
Using the - button, enter the amount you wish to
decrease the temperature.
3
Press the START button to accept the decreased
temperature.
NOTE
This adjustment will not affect the broiling or the Self
Clean temperatures. The adjustment will be retained in
memory after a power failure. The oven temperature can
be increased (+) or decreased (-) as much as 35°F or 19°C.
How to Turn the Interior Oven Light
On/Off
The oven light automatically turns ON when the door is
opened. The oven light may also be manually turned ON or
OFF by pressing the Oven Light button.
How to Set the Preheating Alarm Light
On/Off
The interior oven light automatically turns on when the oven
door is opened. When the oven reaches the set-temperature
after preheat, the oven notifies preheat-end by flashing
the oven lamp until the door is opened. You can activate or
deactivate the smart oven light feature. The default setting is
on.
(For model: LRG3081 / LRG3091 / LRG3021)
1
Press and hold the Timer On/Off button for 3 seconds. The
display will show Opt.
2
Press the Oven Light button to switch between ON and
OFF.
3
Press the START button to accept the change.
How to Adjust the Beeper Volume
(For model: LRG3081 / LRG3091 / LRG3021)
The beeper volume feature allows you to adjust the beeper
to a more acceptable volume. There are four possible volume
levels, loud, normal, low and mute.
1
Press and hold the Timer On/Off button for 3 seconds.
The Display will show Opt.
2
Press the - button to toggle between the various beeper
volumes.
3
Press the START button to accept the change.
How to Set the Clock (12 or 24 hour)
(For model: LRG3091 / LRG3021)
1
Press the Clock button for 3 seconds.
2
Clock
Press the button once for 12-hour, press twice for
24-hour.
3
Press the START button to accept the desired change.
NOTE
The time of day cannot be changed during a timed
baking or Self Clean cycle.
To check the time of day when the display is showing
other information, simply press the Clock button.
If the number buttons are not pressed within 30
seconds after you press the Clock button, the display
reverts to the original setting. If this happens, press the
Clock button and reenter the time of day.
If the display time is blinking, you may have
experienced a power failure. Reset the time.