Tabla de contenido
• Inserting
the bobbin
(_ End of thread
(_ Notch
(_) Notch
(_ Threading chart
[]
Place a bobbin in the bobbin holder with the thread
running off counterclockwise,
[]
Guide the thread into the notch _ on the front side of the
bobbin holder. Draw the thread to the left, sliding it between
the tension spring blades,
[] Continue to draw the thread lightly until the thread slips into
the notch (_. Pull out about 60" (t5°0cm) of thread_
[] Attach the hook cover plate, Check the threading by
referring to the chart (_ shown on the hook cover plate,
[]
[]
[]
_.,
"
-7\._
[]
\
24
Tabla de contenido
