Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Clean Air Starts Here
A
Get Started
1. Remove the unit from
the box. Remove the
front shield from the unit.
2. Take the pre-filter,
HEPA and carbon filter
packages out of the unit.
3. Remove the protective
wrap on filters. Avoid
completing this step on
carpet or a light colored
surface, as carbon dust
may fall from the filters.
4. Follow instructions on
Registration Label to
register your unit.
Atmosphere Sky
Owner's Guide
2
™
B
C
5. Reinstall the filters
ensuring the lock
on the HEPA filter is
secure and reattach
the front shield.
6. Place the unit in the
room where it will be
used, near an electrical
outlet and away from
heating vents and high
traffic areas. Make sure
the space above the
unit is kept clear, for
proper air flow.
7. Plug cord into the rear
of the unit then into a
nearby outlet.
8. Power on.
E
D
Your Atmosphere
Sky
™
System
A. Front Shield
B. Pre-Filter and HEPA Filter
C. Carbon Filter
D. Registration Label/Serial
Number
E. Display Module
F. Power Cord
G. Rear Housing
H. Motor/Fan Assembly
F
G
H
Air Treatment
Tabla de contenido
