Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Locked
Unlocked
Customer Service
Please read this manual carefully. If you have
questions concerning the installation or operation
of your Atmosphere Sky™ Air Treatment
System or to order replacement parts, please
contact Customer Service or via the Internet at:
amway.com/shopatmosphere or amway.ca/
shopatmosphere (in Canada).
US - 1-800-253-6500
Canada - 1-800-265-5470
FCC COMPLIANCE STATEMENT
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions:
1) This device may not cause harmful interference, and
2) This device must accept any interference received, including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the
limits for a class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio
frequency energy and if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is
Replacing the Carbon Filter
1. Power off and unplug the unit.
2. Remove the front cover of the unit by placing your fingertips under
the upper most edge of the front shield, gently pull up on the shield to
disengage (should hear snap) then lift the shield off the unit.
3. Remove the Pre-Filter/HEPA by disengaging the lock at the top of the
HEPA Filter. Set these filters off to the side.
4. Remove the Carbon Filter set off to the side.
Note: Make sure you do not let any carbon particles stain your
clothing, furniture or carpeting.
5. Remove your new Carbon Filter from the packaging
6. Reinstall your new Carbon filter into your unit.
Note: there is an angled edge on the carbon filter. This edge will fit
inside your unit on the lower left.
7. Install the Pre-Filter/HEPA filter combination and lock into place.
8. Replace the front shield by positioning the shield over the display and let
it gently fall into place engaging the magnets on the bottom of the shield.
Then gently push until you hear a soft snap at the middle of the shield at
the upper most edge of the display
9. Plug in your unit.
10. The Carbon Filter monitor light will automatically change from red
to green.
Go to Amway.com for your return form and additional
return information such as how to's, tracking
information, and processing fees. Track your return
with an Amway return label at: returnscenter.
smartlabel.com/amway. For all returns, Amway
Independent Business Owners are charged a
processing fee per invoice. Any merchandise
returned due to errors or damages upon delivery
will not incur a processing fee. We are not liable
for returned merchandise that does not reach our
returns facility.
In Canada, please go to Amway.ca for your return form.
encouraged to try to correct the interference by one or more of the
following measures:
-
Reorient or relocate the module/product.
-
Increase the separation between the equipment and
module/product.
-
Consult the dealer or an experienced radio/TV technician for
help.
-
Changes and modifications made to the equipment without
the approval of manufacturer could void the user's authority
to operate this equipment.
-
To comply with FCC/IC RF exposure limits set forth for an
uncontrolled environment, the equipment should be installed
and operated with a minimum distance of 20cm between the
radiator and your body.
ENGLISH
7
Tabla de contenido
