avoid
injury,
do not
reach into
the large
Lrap with
your
fingers.
The large object
trap
could
contain
sharp objects.
To remove the Large Object Trap/Cylinder Filter Assembly:
1.
Remove the bottom
rack.
2.
Grasp the assembly and turn it counterclockwise
- 1/4 turn as shown below.
To reinstall the filter system:
1.
Return
the
fine
filter
position.
to
its originally
installed
3.
Lift out the assembly as shown below.
4.
Carefully examine the assembly. If you find debris in
the Large Object Trap, turn it upside-down
and gently
tap it on a surface such as a countertop
to dislodge
and remove the debris.
5.
Flush the Cylinder
Filter clean by holding
it under
running water.
2.
Turn the locking
nut clockwise
1/4 turn
until
it is
locked. The arrow on the ring handle and the arrow
on the Fine Filter should point to each other.
Clean the Exterior Door Panel
Colored Doors
Use only a soft cloth that is lightly dampened
with soapy
water.
Stainless Steel Doors
Use a soft cloth with a non-abrasive
cleaner (preferably
a liquid spray) made for cleaning
stainless steel. For the
best results, apply the stainless steel cleaner to the cloth,
then wipe the surface.
Clean the Door Gasket
Regularly
clean the door gasket with a damp
cloth to
remove food particles
and other
debris. Also clean the
door seal, located inside the dishwasher at the bottom
of
the door.
•
Winterizing
Your Dishwasher
If your dishwasher will be unused foran extended period of
time in a location that experiences freezing temperatures
(e.g., in a holiday
home or through
a vacation
period),
have your dishwasher winterized
by an authorized
service
center.
22