Rack Accessories
* Extra Tall item Sprinkler (select models)
If an item istoo tall to be placed into the bottom
rack even
with the top rack in the raised position, remove the empty
top rack by pulling it out of the dishwasher
until it stops.
Pull the front of the rack upward
and outward
until the
rollers are completely
free of the roller guides.
Set the top rack aside. Push the roller guides back into the
dishwasher. Insert the Extra Tall Item Sprinkler into the top
rack spray outlet and turn the sprinkler clockwise to lock
it into position. Load the dishwasher
lower rack as shown
below. It can accommodate
items up to 22" tall.
•
Retrieve the top rack
•
Tilt the rack upwards and position the top rack rollers
onto the roller guides.
°
Continue pushing the top rack until the rollers are on
the guide.
°
Push the rack into the dishwasher all the way.
Flip Tines
Do not block vent
The racks on select models consist of tines that you can
fold down or raise depending
on what you have to load
in the rack.
To fold down:
•
Grasp the tine.
•
Release from notch.
•
Push downwards.
Manual Rack Height Adjustment
avoid dishwasher damage, do not reinstall the to
without
removing the extra tall item sprinkler.
NOTE: Keep the vent on the tub's left side clear by placing tall
items such as plastic cutting boards and tall baking sheets
on the bottom rack's right side, or center.
To remove the sprinkler and return the dishwasher
to its
normal condition:
°
Turn the sprinkler counterclockwise
and remove it.
10
Remove the empty
rack by pulling
it out of the dish-
washer to the point that it can be lifted upward, as shown
above. Pull the rack outward
and up until the rollers are
completely
free of the roller guides.