Changing The Batteries - Medisana Medibreeze PLUS Instrucciones De Manejo

GB
3 Operating
3.9
Switch alarm
on/off
3.10
Changing the
batteries
14
and connect the plug to the socket again
programmed time intervals have been cleared and the device will operate con-
tinuously again when it is switched on. The clock and the alarm must be set
again in this case.
• In order to switch a previously set alarm on or off, press the SET button
the ENTER button
alarm has been activated. If the alarm bell symbol is not displayed, the alarm
will not go off at the set time.
• If the alarm goes off at the set time, it can be switched off by pressing the
ENTER button . If the alarm is not switched off it stops automatically after 2
minutes. The alarm goes off again on the next day at the set time.
• The SNOOZE function can be activated by pressing the SET button
alarm has gone off. In this case the alarm stops and comes on again automa-
tically after 4 minutes.
Your Medibreeze PLUS has a battery compartment containing three LR1130
batteries. These store the on/off time, the timer intervals, the clock and the
alarm time in the event of a power failure or if the device is moved to another
location.
To change the batteries, switch the device off and remove the water tank. Wipe
up the water remaining in the nebulizer chamber with a cloth. Turn the device
over and open the battery compartment beneath the device. Remove the three
batteries and replace them with three new LR1130 batteries. Please note the
battery polarities marked in the battery compartment.
. Switch the device on again. The
simultaneously. If the alarm bell symbol is displayed the
and
after the