Storage Requirements; Prior To Use At Change Of Season - Siemens PA0430M Instrucciones De Uso

Notes:
The flaps on these models are fitted with
safety stops up to which point they can be
opened without risk of the front flap falling
and causing damage and/or injury. The flap
on the appliance can be removed (firmly
pull the flap towards you) to make it easier
to clean and change the filters. Afterwards,
or should for any reason the flap come out
of its original housing, proceed as follows
to fit it:
1° Lift the flap until it comes out of its
lower supports, (Fig. 32: a).
2° Position the plastic leg in the front
groove on the appliance (in T position)
and slide it down to the safety stop,
(Fig. 32: b).
3° fit the lower studs in the front stops on
the appliance making sure that the
plastic leg fitted in the previous step
does not come out of position,
(Fig. 32: c).
When finished, the user should make sure
that the flap is fitted properly and does not
fall when opened again. (The door opens
up to the safety stop). If not fitted properly,
repeat steps 1° and 2° again.
a
Cleaning and Maintenance
b
c

Storage requirements

When the appliance is out of use for a long
period, set the expulsion tube to parking
position so that the appliance takes up as little
space as possible.
❏ To do this, bend the tube towards the back
of the appliance and secure it with the
diffusion hook, Figs. 33 and 34.

Prior to use at change of season

❏ Clean the air filter.
❏ Clean the casing and the grilles if necessary.
32
Fig. 32
Fig. 33
Fig. 34