10. WIFI function- 'Alsavo Pro'APP operation
10.1 operation
1. Please check the Parameter P17=1 (WIFI function) in the controller
Parameter
P17
Then download "Alsavo Pro" APP from App store or Google play in your smart phone.
2. Open "Alsavo Pro" APP, click "+" on the upper left and select "New device". Then Click "Next" and enter the current
WIFI password to connect. Press "
display first, then enter the current WIFi password. The display will show F1 1,F1 2, until F1 6, which means the connect
is OK.
If the connection fails, the APP will indicate "Failed to connect device".
"Nickname and password" interface only appear one time when a new heat pump is connected successfully. You can
name and add encrypt this unit. (This interface may be missing if the wifi network is not steady. You will miss the
chance to name and encrypt it. In this case, default password "123456" is available.)
If someone's APP is in the same WIFI network as yours, his APP could automatically identify your heat pump. And he
can operate your heat pump after inputting your password.
Description
WIFI or Modbus
" 5S on the display no matter it's ON or OFF. Or you can press "
Scope
Default value
0-1
1
78
Remarks
0:Modbus
1:WIFI
" 5S on the