Price Scales - Steinberg Systems SBS-PW-352L Manual De Instrucciones

1. PREPARATION
After opening the carton, place the scale on a stable surface. Adjust the height
of the 4 feet using the spirit level. Connect the balance on a current source, and
ensure that the AC LED is lit: the battery can charge.
2. WEIGHING
Do not put objects exceeding the maximum load of the unit. If the display shows
„OL „ (Overload), immediately remove the weight to avoid damaging the device.
An overweight can damage the load cell and lead to a void of warranty (misuse).
The unit is equipped with a backup that will be checked in warranty cases to
determine the source of the damage.
USER MANUAL
3. INPUT PRICES OF UNITS

PRICE SCALES

When you weigh objects, use the keys 0-9 to enter the price per unit (€ / kg, eg.),
and the scale will calculate the total price.
4. TARE
If you use a container to weigh your products, place the empty container on the
scale, press the button „Tare" and as soon as you see the value „0.000 „, the
scale will be calibrated. Then, the scale will automatically deduct the weight of the
container of the total weight.
5. ADD
EN
If a customer wants to buy different products at different prices, it is possible to
add the prices to view the total value.
a) Install the fi rst product on the scale, enter the price per unit to display the total
price (see 3).
b) Press the „ADD" button. The scale displays „Add01" on the weight display, and the
total price is shown on the price display.
c) Place the following product on the scale and enter the price per unit (see 3). The
scale displays the price for the second product.
d) Press the button „ADD „ again. The scale displays „Add02"on the weight display,
and the total price for both products is shown on the price display.
e) In doing so, you can add up to 99 different products.
6. CLEAR
Press „C / CLR" to exit the mode of addition. The price display shows "C / CLR
„, and you return to the normal mode. If you are not in add mode and you have
entered an incorrect unit price, press the „C / CLR"to clear your value. The scale
displays „0.00" and you can enter the correct price.
7. ZEROING
EN
If the weight displayed is not zero when the scale is empty, press „Zero".
8. SAVE
Press the Save button, enter the unit price to save and press M1. The price is
now saved. You can record prices for each M key
7