Ottobock 1E91 Runner Instrucciones De Uso página 21

Turning
Connection adapter with pyramid adapter only: The pyramid adapter can
be rotated to any position. The pyramid adapter is fixed when the set screws
of the adapter that is attached proximally are tightened.
Required tools: 241 636K13 Loctite®, 710D4 torque wrench
>
1) Loosen the two set screws that are screwed in the furthest and located
next to each other.
2) If the pyramid adapter cannot be turned: Carefully tap the pyramid
adapter from the top to loosen it.
Set the desired rotation angle.
3) Secure the set screws with Loctite® and tighten (for the required torque,
see instructions for use of the respective adapter).
6 Cleaning
1) Clean the product with a damp, soft cloth.
2) Dry the product with a soft cloth.
3) Allow to air dry in order to remove residual moisture.
7 Maintenance
CAUTION
Failure to follow the maintenance instructions
Risk of injuries due to changes in or loss of functionality and damage to the
product
► Observe the following maintenance instructions.
► Following an individual period for the patient to get accustomed to the
product, check the settings of the prosthesis and, if necessary, adapt
them.
► Arrange regular maintenance intervals with the patient depending on the
level of use.
► Inspect the entire prosthesis for wear during normal consultations.
► Conduct annual safety inspections.
8 Disposal
This product may not be disposed of with regular domestic waste in all juris­
dictions. Disposal that is not in accordance with the regulations of the coun­
try where the product is used may have a detrimental impact on health and
the environment. Please observe the information provided by the responsible
authorities in the country of use regarding return, collection and disposal
procedures.
Ottobock | 21