Tabla de contenido
Idiomas disponibles
Idiomas disponibles
GB
6. Accessories
6.1 Pump cover (GRP), lockable, Order no. 7219
6.2 Pump cabinet with delivery nozzle holder,
lockable, Order no. 7763
6.3 Flow meter, Order no. 7579
7.2 Maintenance and inspection table
Interval
Assembly
As
Outside of filling
required
station
Container
Piping system
Monthly
Leakage indi-
cator (double-
walled filling
stations)
Moving parts of
the tank
Leakage indi-
Annually
cator (double-
walled filling
stations)
Every 2.5
Filling station
years
Every 5
Filling station
years
44
Action
Clean off any stuck-on dirt or diesel.
Repair damage to the galvanisation through cold galvanisation or damage
to the paintwork with 2K PU paint RAL 7036 "platinum grey".
Visual check for damage
Check hoses for cracks and porosity, check fittings for leaks
(replace defective parts)
Visual check of the level in the glass cylinder.
If it changes, see operating instructions for "Leakage indicator"
Lubricate hinges and closure with a few drops of universal oil.
Function test. Flow rate of leaking liquid at test valve b 0.5 l/min,
see operating instructions for "Leakage indicator"
Inspection according to ADR 6.5.4.4.1 b) and 6.5.4.4.2
- Documentation in the test report (see section 10)
- For successful inspection – Imprint on type plate (month/year)
Inspection according to ADR 6.5.4.4.1 a) and 6.5.4.4.2
- Documentation in the test report (see section 10)
- For successful inspection – Imprint on type plate (month/year)
7. Maintenance and inspection
7.1 Safety measures
i
Important!
The operator must provide any protective
clothing that may be required.
Who can carry out maintenance
and inspection work?
» Normal maintenance work may be
carried out by trained operating personnel.
i
Important!
Inspections of the filling station with
regard to the ADR approval may only be
performed by a recognised, registered
inspection agency.
Capítulos
Tabla de contenido
