Initial Setup; Operation; Storage; Loading The Filling Station - CEM DT-Mobil Serie Manual De Instrucciones

4. Initial setup

1. Affix the stickers enclosed with the tank
documents permanently and firmly to the tank.
DT-Mobil 400 l labelling (front)
DT-Mobil 600 l / 980 l labelling on both sides
(front and rear)
A
UN 1202 for diesel
Hazard label
B
(flame on red background)
2. Fill the tank (see section 5.4).
3. Perform a test filling as described in section 5.5,
4. After completing the test filling, close the filling
B
A

5. Operation

5.1 Storage

Do not expose the DT-Mobil to direct sunlight for
extended periods either during transport or when in
storage. Excessive heating can degrade the quality
of the high-grade plastic container.
If heating produces overpressure in the sealed
container, this overpressure will be released via
the safety valve g .
Suitable storage conditions:
• ambient temperatures from - 10 °C to + 40 °C.
• level surface.
• canopy for storage outdoors

5.2 Loading the filling station

B
A
Screw cap c off filling connection.
The 400 l/600 l container is filled with an auto-
matically closing delivery nozzle. The 980 l con-
tainer is filled with a fixed filling connection. The
limiting value transmitter h must be connected.
The limiting value transmitter is factory-set to a
95 % filling.
but hold the outlet manifold k in the open filling
opening c.
opening tight using the cap.
►
The filling station is now ready for operation.
Risk of injury!
Door of the pump cabinet or pump
cover must be closed.
Important!
i
- close ball valve of the delivery line d
- close aeration and ventilation
connection f with cap
GB
41