Further Functions - HumanTechnik Signolux S Instrucciones De Servicio

Further functions

9. Recalling the last alert, cancelling the
current alert
By pressing the »●« button (fig. 2) the last
registered alert can be displayed again.
You can also cancel an active displayed
alert by pressing this button.
Figure 4: Lateral connectors
10. AUX-socket and power connector
The »AUX«-jack and the connector for the
power adapter can be found on the right
side of the receiver.
All Humantechnik modules can be connec-
ted to the AUX-output (vibrating pillow etc,
available as accessories)
AUX-output
Connector for
power supply
7,5 V
Mounting
Important note: Kindly keep in mind that
metal parts and other building materials
may interfere with the transmission of the
radio signal. As they can be either visible
or hidden at the desired mounting location
you should always carry out a functional test
at the mounting location before starting the
mounting process, and, if required, choose
a different mounting or installation location if
the reception is not guaranteed.
11. Mounting the »signolux« receiver
The »signolux« receiver is suited either for
free-standing installation or it can also be
mounted using the supplied wall mount. To
use it, fix the wall mount onto a wall (or raft-
er, cupboard etc.) When mounting onto a
brick- or stone wall, you may need a power
drill and stone bit to do so. Use the supplied
wall plugs in this case. Once fixed, hang
the »signolux« receiver onto the wall mount
bracket.
Figure 5: Wall mount
English 13