Pioneer XW-BTS7-T Instrucciones De Funcionamiento página 12

CAUTION
• When your iPod/iPhone is connected to this unit and you wish to operate the iPod/ iPhone
directly, be sure to hold the iPod/iPhone steady with the other hand to prevent malfunctions due
to faulty contacts.
• An iPod/iPhone universal dock adapter is not supplied with this unit.
1. Connect your iPod/iPhone to the dock .
2. To play an iPod/iPhone, press
(Dock/USB indicator : green)
3. This unit plays your iPod/iPhone automatically. If you cannot hear any sound after 20
seconds, reconnect your iPod/iPhone to the dock. (Before you connect your iPod/iPhone
to the dock, make sure you are not playing a video.)
4. You can browse and control your iPod/iPhone with the dedicated iPod control keys under
the grey circle area of the remote control.
You can also play your iPod/iPhone through at USB mode
1. Connect your iPod/iPhone to the USB jack at the back of the unit through the Apple cable
provided with your iPod/iPhone
2. Press [iPod/USB] button on the remote (Dock/USB indicator: red)
3. Other control is same as using the dock.
Note:
• Press Remote iPod/USB key or INPUT key on main unit to switch mode
• When either one of the Dock/USB jack is already connected, if user connect another input, the
unit would stay at the current device mode, and battery charge the new device
Charging
iPod/iPhone recharging occurs whenever an iPod/iPhone is connected to this unit. (This function is
supported in the standby mode as well.
Important
If this unit cannot play your iPod/iPhone, perform the following troubleshooting checks:
• Check whether the iPod/iPhone is supported by this unit.
• Reconnect the iPod/iPhone to the unit. If this doesn't seem to work, try resetting your
iPod/iPhone.
• Check the iPod/iPhone software is supported by this unit.
※ Charging current of dock & USB jack is 2A totally.
iPod/iPhone playback
[iPod/USB] button on the remote control.
12