Hydraulic Oil; Expel The Air; Lubrication - Mettler Toledo BTA231 Manual De Usuario

4.4
4.5
4.6
14
User Manual BTA231
METTLER TOLEDO

Hydraulic Oil

The oil level should be checked at least every six months. The
oil capacity is approximately 0.3 L. Restore the fluid level in
the rubber reservoir to 5 mm below the top; this must be done
with the forks in the lowered position. Use the appropriate
type of hydraulic oil to service the hydraulic pump (L-HV46
or equivalent to ISO VG68).
Expel air
Air may enter the pump unit, when the seals are replaced or
when the oil is changed. In order to expel any air, which may
be trapped, set the control lever to the LOWER position. Then
move the handle up and down for several times.

Lubrication

Use motor oil or grease to lubricate all moveable parts.
Order number 30088256 08/13