SATA Jet 1000 K HVLP Instrucciones De Servicio página 95

Operating instructions SATAjet 1000 K (RP/HVLP), H RP
4.7 Nozzle set
Complete, hand-checked nozzle-set, consisting of paint needle (V4A), paint
nozzle (V4A) and air cap. Mount the nozzle set tightly (use universal wrench
for the paint nozzle). Insert paint nozzle before putting in paint needle. The
air cap should be placed in a position in which the marking is on top. Use
punched hexagon socket (wrench size 12) of universal wrench for paint
nozzle. Only original SATA parts guarantee highest quality and lifetime.
When mounting foreign parts, quality reduction is possible and the SATA
warranty expires resp. dangers to your health may occur.
Nozzle sets, jet 1000 K RP version
132159 for SATAjet 1000 K RP 0,8
132167 for SATAjet 1000 K RP 1,1
132175 for SATAjet 1000 K RP 1,3
132183 for SATAjet 1000 K RP 1,5
132191 for SATAjet 1000 K RP 1,7
132209 for SATAjet 1000 K RP 2,0
153528 for SATAjet 1000 K RP 2,5
153536 for SATAjet 1000 K RP 3,0
154377 for SATAjet 1000 K RP 4,0
154385 for SATAjet 1000 K RP 5,0
Nozzle sets, jet 1000 H RP version
161059 for SATAjet 1000 H RP 1,3
151613 for SATAjet 1000 H RP 1,6
151621 for SATAjet 1000 H RP 1,8
153379 for SATAjet 1000 H RP 2,0
4.8 Spray distance
To avoid overspray and surface problems, make sure to paint with the correct
spraying distance between gun nozzle and the object to be painted and to
adjust the spray gun inlet pressure accordingly.
Version Spray distance
jet 1000 K RP 18 - 23 cm/7 - 9 inches
jet 1000 K HVLP 13 -21 cm/5 - 8 inches
jet 1000 H RP 18 -23 cm/7 - 9 inches
Nozzle sets, jet 1000 K HVLP version
139253 for SATAjet 1000 K HVLP 0,8
139261 for SATAjet 1000 K HVLP 1,0
139279 for SATAjet 1000 K HVLP 1,2
139287 for SATAjet 1000 K HVLP 1,6
139295 for SATAjet 1000 K HVLP 2,0
Gun inlet pressure
2,0 - 2,5 bar/29 - 36 psi
2,5 bar/36 psi
1,5 - 2,0 bar/22 - 29 psi
IX.5