Serum Holder (B52); Multi-Purpose Holder - Vermeiren Alesia Manual De Instrucciones

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 83
E
L
Before use, please check that all the screws are tight.
l
Only have assembly and adjustments done by authorised persons.
L
The manufacturer accepts no liability for damage caused by improper pad adjustments.

SERUM HOLDER (B52)

MULTI-PURPOSE HOLDER

The multi-purpose holder on the lower part of the frame can be used to hold e.g. a bottle holder B83
(e.g. for an oxygen cylinder) or the headrest when not in use.
l
If using the bottle holder while moving the patient, ensure that all the connecting tubes have
no kinks and are safely positioned.
l
When moving a patient, go more slowly, especially around bends.
B
B
A
Oxygen cylinder holder B83
A serum holder can be attached for drips. On the rear
strut on the left-hand side, the bracket can be screwed
into the pre-drilled holds (A). The adjusting screw (B)
can be used to alter the length and angle of the strut.
l
Ensure that all the screws are tight before
use.
l
Before using the serum holder, ensure that it
will not affect giving the drip properly.
l
If using the serum holder while moving the
patient, ensure that all the connecting tubes
have no kinks and are safely positioned.
l
Take care as the serum holder may project
beyond the chair and bang into things!
l
When moving a patient, go more slowly,
especially around bends, in order to avoid the
serum holder swinging.
or
10
ALESIA
06/2009
Tabla de contenido
loading

Tabla de contenido