Table of contents
Specifications
Specifications are subject to change without notice.
Specification
Dimensions (W x D x H)
Weight
Flow rate
Maximum pressure
Temperature probe
Temperature range
Operating temperature
Operating humidity
Measurement range (pH)
Measurement range (ORP)
Accuracy
Repeatability
Cable length
Certifications
Warranty
General information
In no event will the manufacturer be liable for direct, indirect, special, incidental or consequential
damages resulting from any defect or omission in this manual. The manufacturer reserves the right to
make changes in this manual and the products it describes at any time, without notice or obligation.
Revised editions are found on the manufacturer's website.
Safety information
The manufacturer is not responsible for any damages due to misapplication or misuse of this product including,
without limitation, direct, incidental and consequential damages, and disclaims such damages to the full extent
permitted under applicable law. The user is solely responsible to identify critical application risks and install
appropriate mechanisms to protect processes during a possible equipment malfunction.
Please read this entire manual before unpacking, setting up or operating this equipment. Pay
attention to all danger and caution statements. Failure to do so could result in serious injury to the
operator or damage to the equipment.
Make sure that the protection provided by this equipment is not impaired. Do not use or install this
equipment in any manner other than that specified in this manual.
Details
30.5 x 38.4 x 16.6 cm (12 x 15.1 x 6.5 in.)
3.6 kg (8 lb)
100 to 300 mL/min
6 bar at 25 °C (87 psi)
Pt100
0 to 80 °C (32 to 176 °F)
0 to 60 °C (32 to 140 °F)
0 to 100% non-condensing
2 to 12 pH at 0 to 80 °C (32 to 176 °F)
-1500 to +1500 mV at 0 to 50 °C (32 to 122 °F)
< 0.1 pH or ± 5 mV for ultra pure water
0.01 pH/24 hours
7.7 m (25 ft) supplied
CE
1 year; 2 years EU
N O T I C E
English 3