jug lock into their slots, leaving the jug
securely attached (fig. 2).
3. Fitting the lid: Line up the lugs on the
mouth of the jug with the holes on the
lid (fig. 3) and rotate the lid gently until
the lugs are fully home.
4. Fitting the stopper: Line up the lugs
on the stopper with the holes on the lid,
insert and turn it until it locks.
Important: This blender is fitted with a
Important:
Important:
Important:
Important:
dual safety device that stops the motor
from starting if either the jug or the lid
are not fitted correctly.
USE
Make sure that none of the controls are
switched on. Place the ingredients into
the jug but without going above the 1.4
litre mark.
Select the most suitable speed:
• (PULSE) Pulse speed: Crush ice,
milkshakes.
• (3) Maximum speed: Shred
vegetables, cocktails, compotes,
etc.
• (2) Medium speed: Mix pancake
batters, sauces, etc.
• (1) Minimum speed: Mix ready-
made ingredients, etc.
• (0) Stop
Should you wish to add more food
during the process, then do it via the
mouth on the lid (fig. 4).
Press the stop button to switch it off. Do
not try to take the jug off the main body
if the motor is still running.
Warnings:
Warnings:
Warnings:
Warnings:
Warnings:
• Do not operate the blender if it is
empty.
• If you have to stir in food that is stuck
to the sides of the jug, switch the
appliance off first. The blades may
continue to rotate for a moment longer.
Keep spoons or spatulas a good
distance away from the blades to avoid
accidents.
• Continuous operation of the appliance
for more than 3 minutes is not
recommended. After this amount of time
let motor rest for a few minutes before
switching the blender back on.
• For better results when shredding
solid foods, cut it up into small pieces
beforehand.
• Add a cup of liquid when mixing dry
ingredients or crushing ice.
• Do not pour very hot liquids into the
jug.
CLEANING & MAINTENANCE
Before cleaning any part on the blender
press the stop button and unplug the
appliance from the mains supply.
After each use, use warm soapy water
to wash all of the elements which have
been in contact with the food. Take great
care when cleaning the blades.
Use just a damp cloth to wipe down the
motor housing. When storing the
appliance, coil up the cable on the cable
coiler located on the base of the motor
housing.
ADVICE ON DISPOSAL:
Our goods come in optimised
packaging. This basically consists in using
non-contaminating materials which
should be handed over to the local
waste disposal service as secondary raw
materials. Your local town council can
give you information about how to
dispose of obsolete appliances.
TECHNICAL INFORMATION
Rating information please refer to the
rating insert at the bottom of motor unit.