Changing The Battery Pack; Bit Holder - Festool DURADRIVE DWC 18-2500 Manual De Instrucciones Original

4 Machine features
[1-1] Bit storage
[1-2] Switch
[1-3] Forward / reverse switch
[1-4] AUTO/MAN switch
[1-5] Depth stopper
[1-6] Bit
[3-1] LED
[3-2] Cable holder
[3a] Wall mount
The accessories shown or described do not have
to be included with the supplied tool. The speci-
fi ed illustrations appear at the beginning of the
Operating Instructions.
5 Intended use
The drywall screwdriver is designed for the fol-
lowing works:
Main application
Gypsum plas-
ter boards on
metal profi le rails
(≤ 0.88 mm)
Gypsum plas-
ter boards on
metal profi le rails
(≤ 2.25 mm)
Gypsum plaster
boards on wooden
constructions
Gypsum fi bre
boards on metal
and wooden con-
structions
Chip boards/OSB
on wooden con-
structions
Charger TCL 3 suitable for
– charging Festool battery packs: BP, BPS and
BPC (NiMH, NiCd, li-ion are recognised auto-
matically.)
– indoor use only.
The user is liable for improper or non-in-
tended use; this also includes continuous
industrial operation.
Screw types
Drywall screws
with fi ne thread
Drywall screws,
self-drilling
Drywall screws
with coarse
thread
Drywall screws
with milling ribs
Wood construc-
tion and chip
board screws up
to 5 mm
6 Commissioning
6.1 Charger cable holder [3-2]
Unwind the cable completely from the re-
cess before using the charger.
6.2

Changing the battery pack

Removing the battery pack [2 A]
Inserting the battery pack [2 B]
 Battery pack is ready for use immediately upon
delivery and can be charged at any time.
6.3 Charging the battery pack [3]
The LED [3-1] on the charger indicates the re-
spective operating status of the charger.
Type
×
×
×
7 Power tool settings
 Setting must be done only when the power tool
is turned off and will be accepted only after
×
restarting it.
6.1 Changing the direction of rotation [1-3]
Move switch from right to left = clockwise rotation;
×
Move switch from left to right = anticlockwise ro-
tation.
8 Tool holder, attachments
8.1

Bit holder

The bit holder is used for fast replacement of bits.
Risk of cutting injuries when changing the tool!
 Wear protective gloves!
LED yellow – lit continuously
Charger is ready to use.
LED green – fl ashing quickly
Battery pack is charged to max-
imum capa city.
LED green – fl ashing slowly
Battery pack is charged with re-
duced current, LiIon is charged
to 80 %.
LED green – lit continuously
Charging is complete or is not
restarted as current charge
status is greater than 80%.
LED red – lit continuously
Battery temperature is outside
the permitted range.
LED red – fl ashing
General fault display, e. g. in-
complete contact, short circuit,
battery pack faulty, etc..
CAUTION
15