Using The Component Video And Audio Input Jacks; Connecting A Dvd Player - Sanyo CLT1554 Manual Del Propietário

USING THE COMPONENT AUDIO/VIDEO INPUT JACKS
CONNECTING A DVD PLAYER OR OTHER EQUIPMENT
Switch off TV and external equipment before connecting cables. (Cables are not supplied.)
1
Connect a DVD Player or other equipment's Component Video Out to the TV Component Video In (Y-
Pb-Pr) Jacks.
2
Connect the DVD Player's Audio Out to the TV Component L/R Jacks.
3
Press POWER to turn on the TV. Turn on external equipment also.
4
Press the INPUT key to select COMPONENT3.
What you will need
for connections:
1
Component Video
Cable – 1
2
Audio Cable – 1
Remote Control
4
A solid Blue screen with COMPONENT3 displayed
I
means that the Video mode is selected, but no signal is
being detected at the Component jacks. Check connec-
tion, and turn on external equipment.
8
Need help?
Visit our Web site at
3
www.sanyoctv.com
TV Back
TV COMPONENT3
Press the INPUT key after connecting cables to access
I
the A/V Inputs. There is NO need to tune to a blank
channel.
1-800-877-5032
or Call
1
DVD Player
JACKS
2