Connecting The Battery; Immobiliser System - pellenc Rasion Easy Guia Del Usuario

TOOL PREPARATION

CONNECTING THE BATTERY

- Check that the battery switch is turned off (position '0').
- Connect the power cable (10) to the battery (20) taking
care to align the fool-proofing devices.
To prolong the life of the connector, it is advisable to protect it when unplugged. Therefore,
avoid bringing the connector into contact with abrasive or dirty surfaces, or subjecting it to
major impacts (falls).

IMMOBILISER SYSTEM

This lawn mower is equipped with an inclinometer that prevents engine start up when the
mower is steeply inclined or turned over.
- For your safety, it is impossible to start the blades
when it is in a vertical position:
- for cleaning
- for unclogging
- to change worn parts
ATTENTION: If you are working on steep sloping ground, the angle of your lawn mower may CAUTION: If you are working on steep sloping ground, the angle of your lawn mower may be
be too steep and the motor will not start. This is not due to a problem with the lawn mower but too steep and the motor will not start. This is not due to a problem with the lawn mower but to
to the triggering of a safety device. the triggering of a safety device.
If you do not place the mower on level ground (slope <20°), a flashing error code corresponding Position the lawn mower on flat ground (slope < 20°) to unblock the immobiliser.
to the safety shut down of the mower will appear on the control box.
Flashing error code for
safety shut down:
20 10
12