Changing The Input Attenuation Setting - Sony WRT-805B Manual De Instrucciones

Changing the Input Attenuation Setting

You can change the input attenuation setting in 3-dB steps
in a range of 0 to 21 dB. You can change it either in Setting
mode or in Transmit mode.
Changing in Setting mode
1
Set the unit to Setting mode.
2
If the attenuation level is not displayed, press the SET
button to obtain the attenuation indication.
3
Press the + or – button to select the attenuation setting.
AF RF BATT
CH
If you keep either button pressed, the level will be
incremented or decremented successively.
4
Once the desired level appears, set the POWER switch to
OFF to release Setting mode.
Or, press the SET button to continue operations in Setting
mode.
+ button AF RF BATT
– button
CH
The next time you turn on the power only by setting the
POWER switch to ON, the transmitter will be set to
Transmit mode with the selected attenuation setting.
Changing in Transmit mode
You can also change the input attenuation setting during
transmission.
1
If the attenuation level is not displayed, press the SET
button to obtain the attenuation indication.
2
Press the + or – button to select the attenuation setting.
13
(GB)