Panel Mounting - EMKO EZM Serie Manual De Instrucciones

Maximum 15 mm / 0.59 inch
96mm / 3.78 inch
11.5 ±1 mm / 0.45 inch 84mm / 3.31 inch

PANEL MOUNTING

1- Before mounting the device in
your panel, make sure that the
panel cut-out is suitable.
2- Check front panel gasket
Position.
3- Insert the device through the
cut-out. If the mounting clamp are
on the unit, put out them before
inserting the unit to the panel.
4- Insert the unit in the panel cut-
5
4
out from the front side.
5- Insert the mounting clamps to
the holes that located top and
bottom sides of device and screw
up the fixing screws until the unit
completely immobile within the
panel.
5