EMKO EZM Serie Manual De Instrucciones página 2

SPECIFICATIONS :
INPUTS :
Counting Inputs (Ch-A,Ch-B): Switch, Proximity, Capacitive
sensor or encoder can be connected.
Reset Input: Switch, Proximity, Capacitive sensor or encoder can
be connected.
Pause Input: Switch, Proximity, Capacitive sensor or encoder can
be connected.
Sensor Type Selection: NPN or PNP can be selected.
Reset Function: Automatic or Manual.
Count Input Types and Maximum Frequency :
INC,DEC,INC/INC,INC/DEC,UP/DOWN max.20 kHZ.
x1 / x2 / x4: Phase Shift( for encoder ) Counting;Max.10 kHZ.
Reset and Pause Input Filter : 2-50 msec (Can be adjusted in
parameter.)
OUTPUT
Process Output : Relay Output (5A@250VV at Resistive Load)
SUPPLY VOLTAGE
230 V V 50/60 Hz (-15%;+10%) 2.3VA
115VV(-15% ; +10%) -2.3VA
24V V 50/60 Hz (-15% ; +10%) 2.3VA
24 VZ(-%15;+%15) / 24 V V
(Must be determined in order.)
DISPLAY :
Process Value Display :
EZM-4430 : 8 mm Red 6 digit LED Display
EZM-4930 : 13.2 mm Red 6 digit LED Display
EZM-7730 : 10.8 mm Red 6 digit LED Display
EZM-9930 : 13.2 mm Red 6 digit LED Display
Set Value Display :
EZM-4430 : 8 mm Green 6 digit LED Display
EZM-4930 : 8 mm Green 6 digit LED Display
EZM-7730 : 8 mm Green 6 digit LED Display
EZM-9930 : 8 mm Green 6 digit LED Display
LED Display : SV(Set value),OP(Output Position) LEDs.
ENVIRONMENTAL RATINGS and PHYSICAL SPECIFICATIONS
Operating Temperature
Humidity : 0-90%RH (
Protection Class : Ip65
Weight :
EZM-4430 : 210 gr.
EZM-4930 : 240 gr.
EZM-7730 : 270 gr.
EZM-9930 : 340 gr.
Dimensions :
EZM-4430 : (48 x 48mm,
EZM-4930 : (96 x 48mm,
EZM-7730 : (72 x72mm,
EZM-9930 : (96 x 96mm,
Panel Cut-Out:
EZM-4430 : (48 x 48mm)
EZM-4930 : (96 x 48mm)
EZM-7730 : (72 x72mm)
EZM-9930 : (96 x 96mm)
50/60Hz(-%15;+%15)4VA
: 0...50°C
none condensing),
at front, Ip20 at rear.
Depth :95 mm)
Depth :96 mm)
Depth :95.5 mm)
Depth :96 mm)
2