Tabla de contenido
Implementación MIDI
❍ Hold 1
Status
2nd byte
BnH
040H
n=MIDI channel :
1H-3H, 9H (ch. 2, 3, 4, 10)
vv=Control value :
00H-7FH (0-127) 0-63=OFF 64-127=ON
❍ Effect1 (Reverb Level / Delay Feedback)
Status
2nd byte
BnH
5BH
n=MIDI channel :
1H-3H, 9H (ch. 2, 3, 4, 10)
vv=Control value :
00H-7FH (0-127)
* This message determines the level of Reverb when the selected Effect is Reverb, or delay
level when the selected effect is Delay.
* @101
❍ Effect3 (Chorus Level)
Status
2nd byte
BnH
5DH
n=MIDI channel :
1H-3H, 9H (ch. 2, 3, 4, 10)
vv=Control value :
00H-7FH (0-127)
* Flanger effect is not obtained if the Flanger send level of each instrument in the Drum kit
is not set at high.
* For some instruments within the drum kit, the reverb/delay effect may not apply.
❍ RPN MSB/LSB
Status
2nd byte
BnH
65H
BnH
64H
n=MIDI channel :
1H-3H, 9H (ch. 2, 3, 4, 10)
mm=MSB of parameter specified by RPN
ll=LSB of parameter specified by RPN
**RPN**
Control Changes include RPN (Registered Parameter Numbers), which are extended
parameters whose function is defined in the MIDI specification.
RPN can be used to change instrument parameters.
When using RPNs, first the RPN (Controller numbers 100 and 101; they can be sent in any
order) is transmitted to specify the parameter you wish to control. Then, Data Entry
messages (Controller numbers 6 and 38) are used to set the value of the specified parameter.
Once a RPN parameter has been specified, all further Data Entry messages on that channel
are considered to apply to that specified parameter. In order to prevent accidents, when the
desired setting has been made for the parameter, it is recommended that RPN be set to Null.
RPN
Data Entry
MSB
LSB
MSB
LSB
00H
00H
mmH
--
00H
01H
mmH
llH
00H
02H
mmH
--
7FH
7FH
--
--
G Cambio de Programa
Status
2nd byte
CnH
ppH
n=MIDI channel :
1H-3H, 9H (ch. 2, 3, 4, 10)
pp=Program number : 00H-7FH (prog.1-prog.128)
* The first Activación de Nota after receiving a Program change sounds a voice with a new
tone with exception of the voices which have been sounded before the Program change
is received.
148
3rd byte
vvH
3rd byte
vvH
3rd byte
vvH
3rd byte
mmH
llH
Pitch Bend Sensitivity
mm: 00H-18H (0-24 semitones)
Up to 2 octaves, default settings 2 semitones.
This setting becomes effective for subsequent
Pitch Bend messages.
Master Fine Tuning
mm, ll: 00H, 00H-40H, 00H-7FH, 7FH
(-8192 x 100/8192 - 0 - +8192 x 100/8192 cent)
Coarse Tuning
mm: 10H-40H-70H (-48 - 0 - +48 semitones)
RPN reset
No specified parameter is assigned to RPN and
NRPN.
Current value is not affected.
G Cambio de Pitch Bend
Status
2nd byte
EnH
llH
n=MIDI channel :
1H-3H, 9H (ch. 2, 3, 4, 10)
mm, ll=Pitch bend value : 00H, 00H-40H, 40H-7FH, 7FH (-8192 - 0 - +8191)
I Mensaje de Modo de Canal
G Todos los Sonidos
Status
2nd byte
BnH
78H
n=MIDI channel :
1H-3H, 9H (ch. 2, 3, 4, 10)
* All current active voice in the specified channel will be shut off.
G Reiniciar Todos los Controladores
Status
2nd byte
BnH
79H
n=MIDI channel :
1H-3H, 9H (ch. 2, 3, 4, 10)
* The following control values on the specified channel return to the default value.
Controller
Default Value
Modulation
0 (min)
Volume
123 (max)
Panpot
64 (center)
Expression
127 (max)
Hold1
0 (off)
RPN/NRPN
No specified parameter / No change in value
Pitch Bend Change 0
G Desactivación de Todas las Notas
Status
2nd byte
BnH
7BH
n=MIDI channel :
1H-3H, 9H (ch. 2, 3, 4, 10)
* All active voices on the specified channel are turned off. (Each voice responds as to a
Desactivación de Nota.) If Hold1 is ON, this message does not become effective until
Hold is OFF.
Drum track ignores this message.
I Mensaje Exclusivo del Sistema
Status
Data byte
F0H
iiH, ddH, ..., eeH
F0H :
System Exclusive
ii=ID number :
41=Roland
7E=Universal Non-Realtime Message
dd, ..., ee=Data:
00H-7FH (0-127)
F7H :
EOX (End Of Exclusive)
* With the JS-5, the Mensaje Exclusivo del Sistemas can be used to transmit Bulk Dump of
Song/Style data and System data.
For details refer to p. 131.
I Mensaje Común del Sistema
Recognized only when the JS-5 is in stop and MIDI Sync mode is set at MIDI.
G Puntero de Posición de Canción
Status
2nd byte
F2H
llH
mm, ll =Value :
00H, 00H-7F, 7FH (0-16383)
* If the JS-5 receive Song Position Pointer, it calls the position in the song.
3rd byte
mmH
3rd byte
00H
3rd byte
00H
3rd byte
00H
Status
F7H
3rd byte
mmH
Tabla de contenido
