Kulzer cara Scan 4.0 Guia De Inicio Rapido página 31

To properly setup the hardware follow the below steps:
1. Connect the wireless mouse and the wireless keyboard (both not included in the
package) using two USB 3.0 ports in the scanner back panel.
2. Connect any end of the DVI-I cable to the vertical scanner DVI-I port and plug the
other end into the monitor (not included in the package) DVI-I port.
3. Connect the scanner and the monitor to AC socket. Mains: 100/240 V (AC), 50/60 Hz,
connect to mains in accordance with local power supply specifications with flexible
mains connecting cable with hot appliance plug and safety plug to a correctly installed
socket with safety contacts. (The monitor mains connecting cable is not provided in
the package).
CAUTION
·
Do not use any type of extension cord. Do not use intermediate mobile multiple plugs.
Do not connect the device to any type of emergency backup generator.
W19641_REF_66069511_13_QSG_02GB_caraScan4.0_V02
© 2018 Kulzer GmbH
Location and Installation
9