JVC KD-ADV8490 Manual De Instrucciones página 63

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Symptom
• The unit cannot be detected by the
Bluetooth device.
• The unit does not make pairing with the
Bluetooth device.
• Phone sound quality is poor.
• The sound is interrupted or skipped during
playback of a Bluetooth audio player.
• The connected audio player cannot be
controlled.
• The unit does not response when you tried
to copy the phone book to the unit.
• "No Disc" appears on the display.
• "No Magazine" appears on the display.
• "Reset 08" appears on the display.
• "Reset 01" – "Reset 07" appears on the
display.
• The CD changer does not work at all.
Remedy/Cause
• Search from the Bluetooth device again.
• Reset the unit. When "Open..." appears on the display,
search from the Bluetooth device again.
Enter the same PIN code for both the unit and target
device.
• Reduce the distance between the unit and the
Bluetooth cellular phone.
• Move the car to a place where you can get a better
signal reception.
• Reduce the distance between the unit and the
Bluetooth audio player.
• Disconnect the device connected for "Phone."
• Turn off, then turn on the unit.
• When the sound is not yet restored: Connect the player
again.
• Check whether the connected audio player supports
AVRCP (Audio Video Remote Control Profile).
(Operations depend on the connected audio player.)
• Disconnect and connect the Bluetooth player again.
You may have tried to copy the same entries (as stored)
to the unit. Press number button 3 to exit.
Insert a disc into the magazine.
Insert the magazine.
Connect this unit and the CD changer correctly and press
the reset button of the CD changer.
Press the reset button of the CD changer.
Reset the unit (see page 3).
Continued on the next page
REFERENCES
63
Tabla de contenido
loading

Tabla de contenido