Buttons On The Appliance; Using The Appliance; Stopping Operation; Maintenance And Cleaning - Profi Care PC-BSR 3043 Manual De Instrucciones

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 32
• CLOCK
The time will be set automatically once the appliance
has been connected to your router and the app. With
this button, you will also be able to set the time manually.
However, this is only possible if the time is shown in
the display. Enter the time with the
confirm your entry with the OK button.
• PLAN (Timed Daily Cleaning)
Press the this button to set a timer for the appliance.
However, this is only possible if the time is shown in the
display. Use the
/
buttons to enter the time at which
the appliance should switch on and confirm your choice
by pressing OK.
The appliance will remember the entered timer even
when switching off the appliance via the main switch.
Here you may increase the suction power of the appli-
ance. This can only be noted by the beeps being emitted
from the appliance.
Beeps once = normal suction power
Beeps twice = increased suction power
NOTE:
Please keep in mind that the increase in power results
in a shorter running time of the rechargeable battery.
In order to keep the increased consumption of the
rechargeable battery as low as possible the increase in
power will be only around 10 - 15 %.

Buttons on the Appliance

The buttons on the appliance are touch keys. Gently touch
the buttons with a finger to execute the function. Whenever
a button is pressed, it will be confirmed by a beep sound.
NOTE:
In sleep mode, the buttons appear approximately every
7 seconds next to the display.
To make the buttons being displayed, briefly touch the area
where the specific button is located.
The appliance will automatically switch into sleep mode
when within 45 seconds after switching on no cleaning
mode has been activated.
WARNING:
• Always switch off the appliance before servicing or cleaning and
disconnect it from the power adapter!
PC-BSR3043_IM
/
buttons and

Maintenance and Cleaning

Using the Appliance

WARNING:
• Pay particular attention to the safety of babies, young
children and the elderly while the appliance is in
operation. Make sure that no one stumbles over the
appliance.
• Do not touch the wheels and side brushes with your
hands during operation.
CAUTION:
• Do not leave the appliance switched on unattended,
so that you are able to intervene if it is handicapped by
furniture / objects.
• If anything gets stuck in the nozzle and obstructs the
appliance during operation, switch it off immediately
and remove the obstacle.
1. Prior to each use, ensure that the dust container and
filters are in place, empty and cleaned.
2. Ensure the main switch is set to position .
3. Press the
button to switch on the appliance.
4. Press the AUTO button. If the room conditions allow for
it, the appliance will clean the room in zigzag mode.
5. If desired, select another cleaning mode.
6. The appliance will then clean the floor until it has either
completely cleaned the room or the capacity of the
rechargeable battery has dropped to around 15 %. The
appliance will then automatically return to the charging
station.
NOTE:
When pressing the HOME button, even while the
rechargeable battery is still sufficiently charged, it will
stop operating and start making its way to the charging
station.

Stopping Operation

• Stop the appliance by pressing the
• Bring the main switch into position to switch off the
appliance.
• Empty the dust container and clean the filters and sen-
sors as described under "Maintenance and Cleaning".
button.
55
10.07.19
Tabla de contenido
loading

Tabla de contenido