Hach NA5600 sc Instalación página 3

Ocultar thumbs Ver también para NA5600 sc:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 152
Table of Contents
1 Specifications
on page 3
2 General information
on page 5
3 Installation
on page 10
Section 1 Specifications
Specifications are subject to change without notice.
Specification
Dimensions (W x H x D)
Enclosure
Weight
Mounting
Protection class
Pollution degree
Installation category
Power requirements
Operating temperature
Operating humidity
Storage temperature
Number of sample streams 1, 2 or 4 with programmable sequence
Analog outputs
Relays
Digital inputs
Fuses
Table 1 General specifications
Details
Analyzer with enclosure: 45.2 x 68.1 x 33.5 cm (17.8 x 26.8 x 13.2 in.)
Analyzer without enclosure: 45.2 x 68.1 x 25.4 cm (17.8 x 26.8 x 10.0 in.)
Analyzer with enclosure: NEMA 4/IP65
Analyzer without enclosure: IP65, PCBA housing
Materials: Polyol case, PC door, PC hinges and latches, 304/316 SST hardware
Analyzer with enclosure: 20 kg (44.1 lb) with empty bottles, 21.55 kg (47.51 lb) with
full bottles
Analyzer without enclosure: 14 kg (30.9 lb) with empty bottles, 15.55 kg (34.28 lb)
with full bottles
Analyzer with enclosure: wall, panel or table
Analyzer without enclosure: panel
1
2
II
100 to 240 VAC, 50/60 Hz, ± 10%; 0.5 A nominal, 1.0 A maximum; 80 VA maximum
5 to 50 °C (41 to 122 °F)
10% to 80% relative humidity, non-condensing
-20 to 60 °C (-4 to 140 °F)
Six isolated; 0–20 mA or 4–20 mA; load impedance: 600 Ω maximum
Connection: 0.644 to 1.29 mm
20 AWG) recommended, twisted pair shielded wire
Six; type: not powered SPDT relays, each rated at 5 A resistive, 240 VAC maximum
Connection: 1.0 to 1.29 mm
recommended, 5–8 mm OD cable. Make sure that the field wiring insulation is rated
80 °C (176 °F) minimum.
Six, non-programmable, isolated TTL type digital input or as a relay/open-collector
type input
2
0.644 to 1.29 mm
(24 to 16 AWG) wire; 0.644 to 0.812 mm
stranded recommended
Input power: T 1.6 A, 250 VAC
Relays: T 5.0 A, 250 VAC
4 Preparation for use
on page 36
A Appendix
on page 36
2
(24 to 16 AWG) wire; 0.644 to 0.812 mm
2
(18 to 16 AWG) wire; 1.0 mm
2
(24 to
2
(18 AWG) stranded
2
(24 to 20 AWG)
English 3
Tabla de contenido
loading

Tabla de contenido